-
Electrical Accessories
Cell Holder, Double
Supertek double cell holder is a high-quality easy-to-load and easy-to-remove cell holder for holding two standard D-size batteries. It is fitted on a sturdy plastic base. 4mm sockets are provided for the input signals separately with each cell holder. A double cell holder can be used as a single cell holder by using only one cell holder. It may also be used for the parallel or series combinations of two cells. Supplied without battery.
PH60119D -
Electrical Accessories
Cell Holder, Single
Supertek single cell holder is a high quality easy to load and easy to remove the standard D-size battery. It is fitted on a sturdy plastic base. 4mm sockets are provided for the output. Two or more cell holders can be used for parallel or series combinations. Supplied without battery.
PH60119S -
Electrical Accessories
12V AC/DC Power Supply
Provides AC and DC voltages for low-current applications. D.C. output is 0 to 12 volts variable and is electronically smoothed. AC out-put is fixed at 12 volts. The unit is provided with continuous overload and short-circuits protection.
- DC Output : 0 to 12 Volts, Variable.
- Max DC Current: 500 mA.
- AC Output: 12 Volts Fixed.
- Max AC Current: 500mA.
- Protection: Continuous overload and short circuit protection.
PH61011 -
Electrical Accessories
DC Power Supply
Provides diode rectified DC output voltage at rated current. Voltages are controlled by selecting the appropriate voltage socket on the front panel. An analog current meter displays the current drawn by the load. Outputs are provided with overload and short circuit protection. Operates on 220V (±10 %), 50/60Hz input.
PH61013 -
Electrical Accessories
Power Supply, Continously Variable, 25V
The power supply provides continuously variable AC and DC outputs. A meter is provided to indicate both AC and DC voltages. An internal fuse is provided at input and a resettable cut-out for output.
Mains input: 220V (±10 %), 50/60 Hz.
Output Voltage: 0 to 25VAC and wave rectified DC
Output Current (Max.): 10 A for AC, 8 A for DC
Voltage Selection: Voltage is controlled by a large rotating knob on front panel.
Display Meter: Analog meter for AC and DC voltages. Selector switch to select between AC and DC.
Circuit Protection: Mains input 3 A internal glass fuse link. Output is protected by a resettable cut-out.
Output Terminals: Colour coded 4 mm sockets.PH61015 -
Electrical Accessories
AC/DC Power Supply
Provides AC and diode rectified DC output voltage at rated current. DC Voltages are controlled by a rotary switch on the front panel. Both AC and DC outputs may be used simultaneously, provided the combined output current does not exceed the rated current. The power supply operates on 220V, 50Hz input.
DC Output: 0-12V, 2A
AC output: 6V/12V, 5APH61018 -
Electrical Accessories
AC/DC Power Supply
Provides AC and diode rectified DC output voltage at rated current. Voltages are controlled by a rotary switch on the front panel. Both AC and DC outputs may be used simultaneously, provided the combined output current does not exceed the rated current. Outputs are provided with overload and short circuit protection. The power supply operates on 220V (±10%), 50/60 Hz input.
PH61019 -
Electrical Accessories
Regulated DC Power Supply
A regulated DC power supply unit provides a continuously variable DC output voltage with excellent load and line regulation. The voltage output is displayed on an analog/digital meter. Internal protection is provided by a slow blow fuse at the input and overload protection at the output. The power supply operates on 220 V (±10 %), 50 / 60 Hz input.
Please mention ‘A’ for analog and ‘D’ for the digital meter at the end of part no. to specify the display required.
PH61022 -
Electrical Accessories
Spectrum Tube Power Supply
Housed in a black metal body, specially designed spectrum tube sockets enable the tube to be placed in position easily and also provide protection against electrical contact. The bottom socket is spring-loaded for easy tube placement and removal. Holds up to 26cm spectrum tubes.
For use with Spectrum Tubes PH95014.
PH61025 -
Electrical Accessories
Advanced Power Supply
This advanced power supply is widely used due to its high precision, reliable performance, and overload protection circuit. This power supply provides a continuously variable, regulated DC voltage with excellent load and line regulation. The power supplies work in both constant voltage (CV) and constant current (CC) modes. Coarse and fine knobs are provided for very minute adjustments. Dual displays help continuously monitor both output voltage and current. Outputs are provided with overload and short circuit protection. The power supply operates on 220 V (±10 %), 50 / 60 Hz input.
Output Volts: 0 – 12V DC
Output Current: 0 – 5 APH61033D/5 -
Electrical Accessories
Advanced Power Supply
Advanced power supply is specially designed for scientific research and product development in laboratories, universities, colleges and electronic production lines. This instrument is widely used due to its high precision, reliable performance and overload protection circuit. This power supply provides a continuously variable, regulated DC voltage with excellent load and line regulation. The power supplies work in both constant voltage (CV) and constant current (CC) mode. Dual displays help continuously monitor both output voltage and current. Outputs are provided with overload and short circuit protection. Power supply operates on 220V (±10 %), 50/60Hz input.
Please mention ‘A’ for analog and ‘D’ for digital meter at the end of part no. to specify the display required.
PH61035 -
Electrical Accessories
Constant Current Power Supply
This power supply, specially designed for Hall Probe Experiment (PH93225), provides 100% protection against crystal burn-out due to over current protection circuit. The power supply is regulated and ripple-free.
Specifications:
Output Current: 0 – 20 mA DC.
Resolution: 10 μA.
Display: 3½ digit LED.
Power Supply: 220 V (±10 %), 50 / 60 Hz.Suggested Leads (not included): PH90051/3, PH90051/4
PH61500 -
Electrical Accessories
Power Supply E.H.T
A floating, high voltage power source useful for supplying a charge for quantitative electrostatic experiments, gas discharge tubes/spectrum tubes. Continuously variable output up to 6 KV DC. 6V/2A AC or 12V/2A AC filament heating supply, insulated for EHT Voltages. Current limited output: 0-6 KV DC, 50μA with 50MΩ resistor is also provided in this power supply. A rotary control knob is provided on the front panel to adjust the EHT output. The non-hazardous maximum load capacity of 3mA (short circuit current). A digital meter is provided on the front panel to set the required voltage. All outputs via clearly marked 4mm shielded sockets. Both input and output fuse is protected. Plastic Box with Indicator type ON/OFF switch. Supplied complete with detachable mains lead.
Suggested Leads (not included): PH90051/3, PH90051/4
PH62053 -
Electrical Accessories
Smoothing Unit
Smoothing unit reduces ripple from nonregulated power supplies. Maintains a ripple-free output when high currents are drawn. Unit comprises of a LC network of an inductor with two 2200µF capacitors. Maximum input can be upto 8A at 35V, absolute maximum 40V DC.
PH62500
+1 (630) 345-3450