-
Hot Plates
Laboratory Hot Plate, Rectangular, Digital
These rectangular hot plates, with large surface area can be used for heating multiple solutions simultaneously. Insert the external probe in the liquid solution and measure/control the temperature of liquid directly.
Features:
- For heating multiple solutions simultaneously
- Measure and control the temperature of liquid solution directly
- Rectangular shaped, cast iron heating plate
- Powder coated mild steel body
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Temperature probe PT100
- Includes support rods and clamps
- With non-slip rubber feet
Technical Specifications:
- Temperature range: Ambient + 5°C to 350°C, Resolution 0.1°C.
- Temperature accuracy ± 0.5°C
- Overload protection
- Input voltage: 220 V AC ± 10%, 50-60 Hz
- CE certified
CH11170D -
Hot Plates
Laboratory Hot Plate, Advanced
The advanced hot plate with glass ceramic hot plate is used for heating highly reactive solutions.
Features:
- Measure and control the temperature of highly reactive liquid solutions directly with the help of probe
- Glass ceramic offers excellent chemical resistance against strong acid and bases
- Spill proof design
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Temperature probe PT1000
- Includes support rods and clamps
- With non-slip rubber feet
Technical Specifications:
- Top Plate: Chemical resistant glass ceramic plate
- Top Plate Dimensions: 180 x 180 mm
- Max. Capacity: 10 L
- Power Rating: 1000 W
- Temperature range of top surface: Ambient + 5°C, Resolution 0.1°C
- Hot plate indication
- Selection of hot plate and probe temperature
- Independent display for Set and Actual Temperature
- Overload protection
- Input voltage: 220 V AC ± 10%, 50-60 Hz
- CE certified
CH11171D -
Heating Mantles
Heating Mantle with Stirrer, Analog
Analog heating mantle with stirrer are used to simultaneously heat and stir liquid solutions placed in round bottom flasks.
Features:
- Heat and stir liquid solutions simultaneously
- For use with round bottom flasks
- The outer body is made from powder coated rolled aluminium
- Glass fibre yarn knitted heating element provides uniform heating to flask
- Stirring is done using a magnetic bar
- Integrated electronic circuit card for heating and stirring
- Includes support rods and boss heads
- With non-slip rubber feet
Technical Specifications:
- Stirring speed: Upto 1200 RPM
- Temperature range of heating surface: Ambient + 5°C to 350°C
- Overload protection
- Input voltage: 220 V AC ± 10%, 50-60 Hz
- CE certified
Note: The heating element cording may be slightly brown in color. This is a result of testing during the QC process.
CH11172 -
Mixing
Heating Mantle with Stirrer, Digital
supertek’s heating mantle with stirrer, digital is an advanced laboratory instrument that offers precise temperature control and effective magnetic stirring. This instrument efficiently combines digital precision, powerful stirring capabilities, and user-friendly features to meet the demands of modern scientific research and other laboratory experiments.
Product Features:
- With non-slip rubber feet
- Temperature probe PT100
- For use with round bottom flasks
- Stirring is done using a magnetic bar
- Includes support rods and boss head
- Precise temperature control with PID controller
- LED display for showing actual and set temperature
- Stir and measure/control the temperature of liquid directly
- The outer body is made from powder-coated rolled aluminium
- Glass fiber yarn knitted heating element provides uniform heating to the flask
Technical Specifications:
- Temperature accuracy ± 0.5°C, Resolution 0.1°C
- Temperature range of PT100: Ambient + 5°C to 250°C
- Temperature range of heating surface: Ambient + 5°C to 400°C
- Overload protection
- Stirring speed: Upto 1200 RPM
- Temperature accuracy ± 0.5°C
- Input voltage: 220 V AC ± 10%, 50/60 Hz
- CE certified
Note: The heating element cording may be slightly brown in colour. This is a result of testing during the QC process. *10-liter model comes in a rectangular body
CH11172D -
Heating & Tempering
Laboratory Incubator, Forced Convection
Laboratory incubators are used for incubating microbiological cultures. These incubators ensure stable and reliable incubation and guarantee reproducible results for routine tests in the laboratory. Forced air convection offers higher temperature uniformity, lesser energy consumption and quicker set temperatures as compared to natural convection.
Features:
- Quality Construction
* Stainless steel interior
* Powder coated exterior - PID controller for precise temperature control
- Forced air convection produces faster temperature response rates, improves uniformity and reduces fluctuation
- Manually adjustable air flow rate
- Superior insulation for lower energy consumption and better performance
- Glass door for observing samples inside the chamber during operation
- Process Timer
- Open door alert
- Fan failure alert
- Low noise level
- Low maintenance
Technical Specifications:
- Temperature range: Ambient +5° to 70°C, Resolution 0.1°C
- Temperature accuracy ± 0.5°C
- Maximum shelf load: 15 Kg
- Overload protection
- Input voltage: 220 V AC ± 10%, 50-60 Hz
- CE certified
* Also available in SS
CH11175F - Quality Construction
-
Incubator
Incubator Universal
Double walled, inner chamber made of thick anodized aluminium or stainless steel and outer of mild steel, The gap of 75 mm between two walls is filled with glass wool for heat insulation. The door has double viewing to permit observation without opening. Heating elements are placed in ribs at the bottom and at sides. Built-in L-shape horizontal thermometer 0 to 110°C. for uniform heating. Temperature is controlled by a precision thermostat from 5° C above room temperature to 70°C, with sensitivity of ±1°C. Complete with 2 indicator lamps, Adjustable perforated shelves. Having arrangement to fit an automatic thermostat. Works on 220-240 V, 50 Hz. Supplied complete with 1.5 meter of 3-core cable.
CH11177 -
Boxes
Microscope Slide Box
Slide storage boxes are designed for the safe long-term storage of microscope slides. They are produced from durable Polystyrene and offer a hinged lid for easy opening and closing. An inventory sheet is located on the inside cover for convenient slide identification and organization. These storage boxes accommodate standard 25 x 75mm and 1 x 3″ microscope slides. The slide box can hold 25 / 50 / 100 of microscope slides.
CH11191/1 -
Boxes
Microscope Slide Box
Slide storage boxes are designed for the safe long term storage of microscope slides. These storage boxes accommodate standard 25 x 75 mm /1 x 3″ microscope slides.
- Made of Durable High Quality ABS Plastic.
- Heavy walls will not wrap, splinter or crack.
- Cork sheet lined base for safe storage.
- Boxes are unaffected by humidity & also are insect proof.
- Available in 4 different capacities for storage of 12/25/50/100 slides.
- An inventory sheet is located on the inside cover for convenient slide identification and organization.
*Standard grey color.
*Also available in Blue, Grey, Black, White colors on request. MOQ applicable.CH11191/11 -
Boxes
Slide Mailers
These slide mailers made of polypropylene are the best suited option for secure shipping & storage of slides. Easy to secure snap provide safe storage. Available in different sizes, these slide mailers provide an excellent view of the slides placed inside for easy identification.
CH11191/5 -
Laboratory Fittings
Water Taps, Swan Neck
Inlet tail is threaded 1/2 in. BSP, The outlet brass tube is coupled to the tap standard by means of a sleeve nut allowing the neck to swivel or to be locked in any desired direction, leakproof operation, designed for pressures upto 80 psi finished in hard chrome plating.
CH11200 -
Laboratory Fittings
Gas Taps
Made of selected material, heavy construction, made to ensure leak proof performance. Each piece is tested for pressure. Lever handle is spring loaded and has locking arrangement to ensure that rotation does not go beyond 90°, standard nozzles have 1 mm bore, inlet 1/4 in. BSP, flange dia. 54 mm with three holes to screw on bench or any other surface. Designed to operate pressure upto 2 psi (0.14 Kg/cm2), suitable for coal gas, natural gas or bottled LPG, supplied complete with adaptor.
CH11205
+1 (630) 345-3450