-
Electricity
Induction Coil, Ruhmkorff
Supertek induction coil is a device, which produces a spark with an input of 6 to 12 V DC and is therefore ideal for use with vacuum tubes, eudiometers etc. A fully adjustable vibrator system is incorporated and spark suppression capacitors are housed in the base. A pair of pointer electrodes is supplied with the instrument. Pointer electrodes have an insulating handle for adjustment of the spark gap. Low voltage input is given via a pair of mounted 4 mm Sockets. Induction Coil.
PH50237 -
Electricity
Induction Coil, Ruhmkorff
Coils are wound with highly insulated copper wire impregnated with paraffin wax; input 6-8 V dc through two 4 mm socket terminals, with an adjustable trembler system. The spark suppression capacitor is housed in the base. A pair of pointer electrodes with insulated handles for adjustment of the spark gap is provided.
PH50238 -
Electricity
Induction Coil
This box-form Induction Coil has a 50 mm spark gap and can produce pulses of high voltage spark from a low voltage direct current source such as a battery. It is suitable for use with gas-filled discharge tubes, vacuum tubes, eudiometers and for general laboratory work. It is comprised of two coils fully enclosed in a polished wooden case with binding posts. Spark gap at the discharge points can be adjusted by sliding rods back and forth.
PH50240 -
Electricity
Primary and Secondary Coil
The apparatus demonstrates the principle of Electromagnetic Induction and helps explain the concept of a transformer. Primary and Secondary coil consist of coils mounted on plastic spools, with 2 binding posts on each coil. You can slide the primary coil inside the secondary coil. Also includes a soft iron core for induction experiments. Primary coil has 480 turns while secondary coil has 3800 turns. Requires a galvanometer and bar magnets, not supplied with apparatus.
PH50250 -
Electricity
Primary and Secondary Coils
To demonstrate electromagnetic induction and transformer principles. Primary coil with 175 turns, secondary coil with three different windings 500; 1000 and 1500 turns. Coils are wound on moulded pipe and are provided with 4 mm safety sockets. With Plated Iron Core.
PH50252 -
Electricity
Air Core Solenoid
Air Core Solenoid helps investigate the magnetic field of a long coil. It can also used with the Current Balance as an accessory to measure the force on a conductor in a magnetic field. The solenoid has coils wound on a plastic tube with approximately 575 turns of copper wire. It can carry a current of 5A continuously, or 10A intermittently.
PH50255 -
-
Electricity
Wheatstone Bridge, Two Gap
Comprising a resistance wire (SWG 26) stretched along a meter scale subdivided in mm and marked every cm. is clamped to stout brass plates so as to avoid end errors. A plated brass strip with 4 mm socket terminal is fitted along the meter rule to provide a two-gap system for normal Wheatstone bridge work. Complete with jockey.
PH50401 -
Electricity
Wheatstone Bridge, Four Gap
Four gap systems, enabling two additional resistances to be interpolated in the additional gaps, enable greater accuracy of measurement by reducing unwanted resistance to a minimum. Two brass strips are provided to close the gaps when so required. Complete with jockey.
PH50404 -
Electricity
Slide Wire Wheatstone Bridge
Consists of a resistance wire with a sliding contact and a strip of aluminum to provide two “arms” of the bridge for known and unknown resistance. Strips of heavy aluminum are provided with a single gap in each of two arms for the resistance. All components are mounted on a heavy sheet metal base. With Instructions.
PH50410
+1 (630) 345-3450