-
Accessories
Quarter Wave Plate Holder
The holder is designed to hold a 22mm quarter-wave plate. A waveplate is an optical device that alters the polarization state of a light wave traveling through it. The quarter-wave changes the phase difference between the two components of polarized light traversing it by one-fourth cycle.
HA030 -
Accessories
Half Wave Plate Holder
The holder is designed to hold a 22mm half-wave plate. A waveplate is an optical device that alters the polarization state of a light wave traveling through it. Half-wave plate, reduces by ¹/₂ cycle, the phase difference between the two components of polarized light traversing it.
HA031 -
Accessories
Light Sensor Holder
Light sensor module for use with rotating table assembly (UP030). The light sensor when used with Data Processor measures light intensity at various angles of reflection and gives a continuous smooth curve of angle vs light intensity. The meter reads with a precision of 1 lux.
HA511 -
Accessories
Travelling Light Sensor Holder
Travelling Light Sensor Holder, mounted on the square rod, can be held upright on the optical bench. When used with Data Processor (DP1), this holder measures the light intensity of various orders (like 1st, 2nd, and so on) of the interference patterns formed by diffusing light by any obstacle or opening.
Specifications
Least count – 1 LuxHA512 -
Heating & Tempering
Heat-On Block System
Efficient and safe heating blocks for round-bottom flasks (50 ml to 5000 ml), made from anodized aluminum for excellent heat transfer and chemical resistance. Compatible with all major hotplate stirrers. Eliminates messy oil baths, ensures uniform heating, and saves energy.
Product Features:
- Designed for safe, clean, and energy-efficient heating of Round Bottom Flasks (RBF) from 50 ml to 5000 ml.
- Manufactured from high-grade Aluminium for excellent heat conduction and durability.
- Available in Anodized Silver Finish
- Deep cavity design for maximum flask contact ensuring uniform heating.
- Compatible with all leading Hot Plate Stirrers up to 135 mm diameter.
- Equipped with a Temperature Sensor hole (3 mm Ø) for direct probe insertion.
- Reduced energy consumption compared to oil baths.
- Zero oil contamination, zero maintenance.
- Optional lifting handles for safe removal
Technical Specifications:
- Material – Aluminium
- Finish – Silver Anodizing
- Flask Holding Capacity – 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml.
- Maximum Temperature – Use Upto 260°C
HOB -
Higher Science
Interferometer Experiment
Objectives
- To produce and observe the interference pattern.
- To measure the wavelength of laser source using the interferometer.
Principle
Phenomena of interference can be explained by the principle of superposition. Consider two E.M waves simultaneously propagating through the same region of space. The resultant electric field at any point in that region of space is the vector sum of the electric field of each wave. Depending on the strength of the resulting electric field at a point in space where the two waves superpose, we observe dark and bright regions in the interference pattern.
Key Features
- Easy to Setup – The apparatus is built on a sturdy and portable platform. The legs are height adjustable to aid leveling of the platform & precise optical alignment of the laser beam. All this reduces the time taken for setup and aids the ease of measurements.
- High quality beam splitter and reflective mirrors – The setup comes with 40 x 40 x 40mm beam splitter cube and 40 x 40mm (98% highly reflective) mirrors for clear fringe pattern.
- 1 micron step movement – The complex double lever mechanism enables a least count of 1 micron in movement of the fixed mirror. Measurement error is less than 5% in wavelength measurement.
INT1-C -
Micropipettes
Miniature Fixed Volume Micropipettes
Lilpet- Miniature Fixed Volume Pipette with Two Step Plunger Operation. This miniature fixed-volume micropipette is a low-cost. high-precision liquid handling instrument. It offer two-step plunger operation and is specially designed for use with diagnostic kits. The ergonomic and intuitive design of these micropipettes helps in performing sensitive operations with high precision, accuracy and reliability in practical laboratory environments.
- LILPET has an optimum size- 130 mm in length – for high user comfort during pipetting.
- LILPET is fully autoclavable at 121 ° C and 15psi for a duration of 10-15 minutes.
- LILPET is calibrated in an ISO 17025 accredited laboratory according to ISO 8655 standards
LIL -
Micropipettes
Miniature Fixed Volume Micropipettes
Lilpet Pro – Miniature Fixed Volume Pipette with Tip Ejector and Two Step Plunger Operation
This miniature fixed-volume micropipette with tip ejector is ideally suited for all sensitive applications. The tip can be removed easily by the single press of the tip ejector button. The two-step plunger operation ensures last drop dispensing. The ergonomic and intuitive design of these micropipettes helps in performing sensitive operations with high precision, accuracy and reliability in practical laboratory environments.- LILPET has an optimum size –130 mm in length – for high user comfort during pipetting.
- LILPET is fully autoclavable at 121°C and 15 psi for a duration of 10–15 minutes.
- LILPET is calibrated in an ISO 17025 accredited laboratory according to ISO 8655 standards
LILP -
Add on's
CMOS CAMERA IS SERIES
These high-resolution CMOS cameras can be directly integrated into advanced trinocular microscopes. Designed for precision imaging, research, and documentation, these systems offer plug-and-play digital microscopy with powerful IS Series software for real-time image enhancement, 2D measurements, and high-definition imaging.
Model Range & Highlights:
5MP CMOS Camera, IS-500
- Sensor : 1/2.5″ 5.1M/AR0521(C)
- Pixel Size : 2.2×2.2 pm
- FPS/Resolution : 30fps @ 2592×1944, 30fps @ 1280×960, 30fps @ 640×480
- Best For : Routine brightfield applications, teaching labs
- Exposure Range : 0.1 – 1000 ms
- White Balance & Colour Rendering : ROI white balance, ultra fine colour engine
- Power Supply : USB powered (5V)
MA-IS-01 -
Add on's
CMOS CAMERA IS SERIES
These high-resolution CMOS cameras can be directly integrated into advanced trinocular microscopes. Designed for precision imaging, research, and documentation, these systems offer plug-and-play digital microscopy with powerful IS Series software for real-time image enhancement, 2D measurements, and high-definition imaging.
Model Range & Highlights:
12MP CMOS CAMERA, IS-1200
- Sensor : 1/2.3″ 12M/IMX577(C)
- Pixel Size : 1.55×1.55 pm
- FPS/Resolution : 20fps @ 3840×3040, 20fps @ 1920×1520, 20fps @ 960×760
- Best For : Detailed educational and research applications
- Exposure Range : 0.1–2000 ms
- White Balance & Colour Rendering: ROI white balance, ultra fine colour engine
- Power Supply : USB powered (5V)
- Common Software Features (IS Series Software):
· Image enhancement (hue, saturation, contrast, etc.)
· Real-time auto-exposure & white balance
· 2D measurement & calibration
· Compatible with Windows, Mac OS, Linux, Android Multiple Platform
· SDK support for C/C++, C#/VB NET, Python, Java, Direct Show, Twain etc
MA-IS-02 -
Add on's
1.3 MP Digital Imaging Camera
1.3 MP DIGITAL IMAGING CAMERA
A versatile MD-130 entry-level imaging module with a 1/3″ 1.3MP sensor,
ideal for routine microscopy needs.
· Resolution : 1280×1024
· Sensor : 1.3 Mega pixel, 2.2μm pixel size
· Frame Rate : 17fps
· Software : Future Win Joe with editing and management tools
· Spectral Range : 400–650nm (with IR filter)
· Best For : Basic research, education, and documentation
· Output : Image and video captureMA-MD-01 -
Add on's
3.0 MP High Clarity Digital Camera
Designed for mid-range imaging requirements, the MD-300 delivers higher resolution and flexibility with both YUY2 and MJPG output formats.
· Resolution : 2048×1536
· Sensor : 1/2.5″ 3MP, 2.2μm pixel size
· Frame Rate : 15fps
· Spectral Range : 400–650nm (with IR filter)
· Enhanced Preview Options : Multiple resolutions from 352×288 to 2048×1536
· Exposure & White Balance : Manual and auto modes
· Best For : High-school/university research labs and industrial inspectionMA-MD-02
+1 (630) 345-3450