Physics
-
Optics
Vernier Microscope
For measurement on two axes, with horizontal and vertical scales, heavy stand with leveling screws, and a carriage fitted with micrometer screw for fine adjustment. Another sliding carrier is provided on vertical bar also with micrometer screw for fine adjustment. Microscope tube is fitted with rack and pinion focusing. Stainless steel scales and verniers, horizontal scale 160 mm with vernier reading to 0.01 mm and vertical scale 140 mm with vernier reading to 0.01 mm. Ramsden eye-piece x 10 with crossline graticule and 50mm focus objectives. Magnifier is provided to read vernier.
PH30780 -
Waves & Sound
Bell Jar and Vacuum Pump Set
Simple, innovative kit allows you to perform a number of experiments on vacuum and air pressure. The kit clearly demonstrates the method by which a pump works. Also illustrates that air has mass and helps find its mass and density. Explain the effect of surrounding air pressure on a sealed balloon. The balloon will expand when the surrounding air is removed. And also demonstrate that liquid boils at reduced temperature when the surrounding air pressure is reduced. with 2 balloons With instructions.
PH36013 -
Waves & Sound
Bell in Bell Jar
Without air or matter, sound waves cannot travel and therefore cannot be heard. This bell jar effectively demonstrates this concept using a battery-operated buzzer housed inside the jar. When the buzzer is placed beneath the jar and a vacuum is created inside the jar, students will observe a total absence of sound. Once the air is returned to the jar, the sound of the buzzer can be heard once more. The activity requires a vacuum pump & plate, not included.
PH36015A -
-
Waves & Sound
Hand Vacuum Pump
The vacuum pump is made of durable plastic. It can easily provide a vacuum of 500mmHg by pumping its handle, the pumping rate of which is about 15ml per pumping. The pump itself is sealed and self-lubricated. By changing its working mode, the pump can be used to establish air pressure as high as approx. 2 atm. It is a must for middle and primary school laboratories.
PH36018B -
-
-
Waves & Sound
Ripple Tank
Transparent acrylic plastic ripple tank, supported in a sturdy plastic frame which has recesses to hold four legs with leveling feet. The tank edges are shaped to minimise undesired reflections. Tank has a drain hole closed by a rubber stopper. With two light alloy uprights to carry a horizontal rippler support rod which is adjustable for height. The ripple assembly, elastically suspended from the support rod, consists of a 4 – 6 V DC motor mounted on a wooden beam. The motor has an eccentric weight which causes the beam to oscillate. Two-point sources are provided by two plastic spheres, each mounted on a right-angle rod. A metal rod is fixed centrally into a socket in one short side of the frame to afford support to the illuminant. Overall size of the tank 580 x 500 x 80 mm, window area 370 x 280 mm, height of tank above bench level (with legs attached) approx. 375 mm. Complete with following accessories:-
- Two straight obstacles of aluminium alloy length 130 mm.
- One straight obstacle length 40 mm.
- One curved reflector radius 200 mm.
- One trapezoidal plastic plate for refraction.
- One wood hand wave roller.
- One water dropper.
- One pkt. rubber bands.
- One foam plastic sponge.
- One illuminant with a 12 V, 24 W lamp mounted in a lamp house and provided with a long supporting rod which can be attached to a retort stand. With instructions. Without power supply
PH36044 -
Waves & Sound
Ripple Tank
A complete setup for demonstrating wave phenomena including reflection, refraction, diffraction, and interference. The transparent tray (33 cm × 30 cm approx.) is supported on adjustable legs for levelling. Wave patterns are observed using a mirror and projection screen, with illumination from a white LED light source in steady or strobe mode.
Features:
- Transparent tray with 33 × 30 cm viewing area.
- Adjustable three-leg stand for levelling.
- White LED light source (steady and strobe).
- Ripple generator with interchangeable plane and point dippers.
- Digital controller: ripple frequency 1–50 Hz (0.5 Hz steps), light frequency adjustable in 0.1 Hz increments.
- Accessories: long/short/mini barriers, curved reflectors, concave/convex/trapezoidal refractors.
- Easy to assemble, operate, and clean.
- Supplied with User Manual for guided experiments.
PH36044B
+1 (630) 345-3450