- Instruments, Instruments
Single Beam Microprocessor UV-VIS Spectrophotometer
Range 195 to 1000 nm with facility for automatic concentration, %Transmission, Absorbance and K Factor measurements. Manual wavelength calibration and selection. Sample holder with 4 position selector control for 10 mm path length cuvettes. Interface (RS 232). Set of 2 quartz and 4 glass cuvettes is provided. Software included.
- Cover 195 to 1000 nm.
- 4 Position Cuvette Holder.
- RS-232C Computer Interface.
- High wavelength Precision.
- Compact and Good Looking Shape.
- Highly Accurate and Stable.
Photometric Range : %T : 0 to 100%, Abs.: 0 to 1.999. Conc.: 0 to 1999, K-Factor : 0 to 1999,
Accuracy : ±0.005 Abs at 1.0 Abs, ±0.010 Abs at 1.0 Abs,
Stray Light : Less than 0.1% Abs at 320 nm,
Readability : ± 1 Count,
Data Readout : Single Line LCD display,
Key Board : 4 KEYS, Soft touch membrane type,
Printer Interface : Printer interface for any printer,
Serial Interface : RS 232C interface.
Light Source : a) Tungsten Halogen Lamp; b) Deuterium Lamp (D2)
Detector : Wide range Silicon Photodiode.
Optics : Complete mirror optics with resolution 1200 grooves/mm grating.
Sample Holder : 4 position adjustable sample holder.
Power : 230 V ± 10%, 50 Hz. AC.
Dimensions : 420 x 350 x 240 mm (l x b x h) Approx.
Weight : 10 Kg.(Approx.).
Wavelength : 195 to 1000 nm.
Spectral Bandwidth : 2 nm.
Accuracy : ± 0.5 nm.
Repeatability : ± 0.3 nm.
Resolution : 0.1 nm.
- Instruments, Instruments
Digital Colony Counter
4 digit LED display Range 0-9999 with 125 memory, hold and count correction facility. Data restored even after power failure.
Digital Display : 4 digit, 999 Max. Count.
Dish Size : 110 mm.
Magnification : x1.7.
Dimensions : L 210 x B 270 x H 125 mm (approx.).
Weight : 3 Kgs. (approx.).
Packaging : 23 cm x 28 cm x 20 cm.
Power : 230 V ± 10% AC, 50 Hz, 40W.
Accessories : Marking Pen (1 No.), Magnifier Lens (1 No.)
- Instruments, Instruments
Automatic Melting Point Apparatus
High Precision Melting Point is Displayed on 3½ digit display on front panel. Automatic Furnace cut off with audio and visual indication. Range 40°C to 350°C, readability 1°C. Fully automatic operation.
- Fully Automatic,
- Range upto 350°C,
- Highly Accurate,
- No Silicon Oil/Heating Media Required.
Display : Digital 3½ Digit, Bright LED,
Accuracy : 1%,
Operation : Fully Automatic,
Dimensions : L 405 x B 360 x H 235mm (approx.),
Weight : 5 Kg. (approx.),
Power : 230 V ± 10%, 50Hz.
Accessories : Capillary Tube 100 No , Cleaning Tool 1 No.
- Instruments, Instruments
Digital Dissolved Oxygen Meter
3½ digit LED display with Gold/Silver D.O. Probe (Table Model). These are used to evaluate oxygen liquefy in water and index of biological and physical processes in water. With the specification of power 230V A.C. 50 Hz. and range between D.O. 0 to 20.0 PPM, these are highly durable and accurate.
Range D.O. : 0 to 20.0 ppm,
Resolution D.O. : 0.1 ppm,
Accuracy D.O. : 0.1 ppm + 1 count,
Temp. Compensation : 0°C to 50°C
Manual Compensation D.O. : + 3%
D.O. Sensor type : Amperometric Gold / Silver membrane.
Display : 3½ digit LED display,
Power : 230 V AC 50 Hz.
Weight : 2 Kg.
DO Electrode : 1 No.
Instruction Manual : 1 No.
D.O. Membranes : 10 Nos.
- Apparatus & Instruments, Instruments, Instruments
Auto Karl Fisher Titrimeter
Auto Karl Fisher Titrimeter having array of LED’s provided with inbuilt stirrer, auto zero burette, adjustable timer, dual platinum electrode and other accessories.
- High Performance
- Superior Efficiency
- Reliable Operations.
Display : Array of 10 LED’s in line,
Sample Size : 1-50 mg of water,
K.F. Dispensing : 0.05 ml,
Resolution Indication : RUN ADD END Display in Auto Mode,
Power : 230 V AC ± 10%, 50 Hz,
Size : 435 x 305 x 150 mm,
Weight : 5 Kg. (Approx.),
Buzzer : Yes.
- Oven, Oven
For heating up to 250 °C. Inside chamber made of thick aluminium or stainless steel sheet. Outside made of mild steel, the gap between the walls being filled with glass wool. Heating elements are placed in ribs at the bottom and sides of chamber for uniform heating. Thermostatic control is provided which gives a temperature fluctuation of not more than ±1 °C read by an L-shape thermometer. The insulated door closes firmly against heat resistant gasket and is provided with a handle with spring latch. Front panel has ON / OFF switch, 2 neon indicators and dial for temperature setting. Unit provided with 1.5 m of 3-core cable. Works on 220-240 V AC.
- Pumps, Pumps
Vacuum Pump, Rotary, Oil-Sealed
General purpose, single stage with low level of vapour emission. Can be used as a pressure device also. Direct drive, compact construction, displacement 32 liters/minute, ultimate vacuum without gas ballast 0.1 mm of mercury, motor rating 0.25 HP, rpm 1425, supplied with 1 meter 3-core mains cable and 1.5 litre oil. For use on 220-240 V, 50 Hz.
- Refractometers, Refractometers
For quick examination of refractive indices & mean dispersion of liquids, solids and powders.Comprising Abbe double prisms, with thermostat, compensator, telescope mirror and radial arm with vernier. Range nD 1.3000 to nD 1.7000 in steps of 0.001, sugar percentage 0 to 95% in steps of 1 division.
Magnetic Stirrer With Hot Plate
For simultaneous heating and stirring of solutions. A cast stainless steel hot plate is mounted above a variable speed magnetic stirrer. An Energy regulator for the hot plate, on/ off switch and continuous speed control for the stirrer motor mounted on the front panel. Supplied completed with Teflon coated stirrer bar of size 9 x 25 mm and 9 x 35 mm. Maximum Temperature Range 400°C Heat Output 400 W, Capable of stirring up to 2 liters.
- Lab Equipment, Labware, Stirrers, Stirrers
Hot Plate Magnetic Stirrer
Hot Plate Magnetic Stirrer is used for simultaneous heating and stirring of solutions. Two control knobs on the front panel allow you to set heat output and stirring speed independently. These are equipped with powerful heating elements providing very quick heating of the samples.The integrated circuit allows user to precisely control the temperature and speed.It is supplied complete with Teflon coated stirrer bar, support rod, boss head and clamping rod for connecting external temperature probe.
- Lab Equipment, Labware, New Products, Stirrers, Stirrers
Hot Plate Magnetic Stirrer, Advanced, Ceramic PlateLab Equipment, Labware, New Products, Stirrers, Stirrers
Hot Plate Magnetic Stirrer, Advanced, Ceramic Plate
Advanced hot plate magnetic stirrer designed to provide reliable performance, dependable safety and precise control. The high Density glass ceramic top plate offers excellent chemical resistance against strong acids and bases. PID temperature technology controls heating process ensuring that target temperature is reached quickly and accuracy is enhanced.
It also has excellent speed control upto 1500 rpm, giving gentle and precise control of the stirring speed. The body is made with heat- resistant and anti-corrosion die-cast aluminum body and finished with a high quality powder coating.
- Stirrers, Stirrers
Motorless Magnetic Stirrer
An ideal stirring device for low viscosity liquids, can work continuously for longer duration.
1. Power ON / OFF switch with fuse protections
2. Smooth variable speed control
3. Direction selector (Clock Wise Counter Clock Wise)
4. Reset Button
5. Viscosity selector (High Low)
6. Compact sleek stainless steel housing
Drive: Motor Less Drive, No wear and tear of moving parts or bearings. Suitable for continuous operation for longer duration.
Speed Control: Step less Variable speed facilitating stirring from 100 900 RPM.
Re-Set Option: In case the magnetic follower moves off center due to external disturbance to the liquid or shifting of the vessel, the reset button can bring the follower in position and will restart the stirring at the speed set by you.
Direction Selection: Allows you the options of stirring clock wise or counter clockwise rotation.
High / Low Speed Mode: Option of High Speed Mode & Low Speed to select, depending on the viscosity of the solution being stirred.
Heating & Temp. Control: Surface Temperature of Hot Plate
Model CH12398/1 – Not Applicable (Only Stirring)
Model CH12398/3 – 250 °C
Model CH12398/5 – 350 °C.